How to operate a crawler mobile stacker and reclaimer?
[1] Manual operation is the most basic way to operate a stacker reclaimer, and is used to handle small batches of materials. In manual operation mode, the operator needs to set and operate through the console, including the following steps:
1. Move the stacker-reclaimer to a suitable position so that it can directly access the material source.
2. Install or fix the hopper to facilitate direct material collection.
3. Open the console and set the operating parameters and starting position.
4. Start operation, the hopper starts to descend, directly contacts the material source, and starts to suck the material.
5. When the material in the hopper reaches a certain level, or the stacking location needs to be moved, turn off the extractor and move the stacker-reclaimer to the target location.
6. Turn on the suction device, start to descend automatically, and deposit the materials at the target location.
The advantage of manual operation is that it has low requirements for operators and is suitable for processing a single type of material. However, its disadvantages are slow operation speed and low production efficiency.
[2] Automatic operation :
Automatic operation is an efficient operation mode suitable for handling large quantities of materials. In automatic mode, the stacker-reclaimer can automatically operate the set parameters through the computer control system, reducing the time and possibility of error of manual intervention.
In automatic operation mode, the stacker-reclaimer can perform various degrees of automated operations, such as automatically adjusting the position height, setting material stacking parameters, etc., which improves operating efficiency and production efficiency.
However, the automatic operation mode requires a certain understanding of the basic operation methods of the control system, and operators need professional training to master it. The automatic operation mode has high requirements on the performance and quality of the equipment, and the maintenance cost is high.
The above are two common ways to operate a stacker-reclaimer. For new operators, it is recommended to learn the manual operation mode first, and then switch to the automatic operation mode after gradually adapting. Through continuous practice and learning, you can better master the actual operation skills and precautions of the stacker-reclaimer and improve production efficiency .
https://www.isunbirdforeign.com/
