1. Clean the surface and internal structure of the loading arm regularly. Since the marine loading arm is in the marine environment all year round and is easily corroded by seawater and salt spray, it needs to be cleaned with a detergent. When cleaning, be careful to avoid using highly corrosive detergents to avoid damaging the surface coating of the loading arm.
2. Check the various parts of the loading and unloading arm regularly to see if they are in good condition. Including the tie rod, hydraulic cylinder, bearing and other parts, check whether there is looseness, wear or oil leakage. If any abnormality is found, it should be repaired or replaced in time to avoid affecting the normal use of the loading and unloading arm.
3. Pay attention to the lubrication of the loading and unloading arm. Lubrication is an important measure to maintain the normal operation of the loading and unloading arm. It is necessary to regularly add oil or grease to the key parts of the loading and unloading arm to ensure normal friction between parts, reduce wear and extend service life. It is also necessary to regularly check whether the electrical system of the loading and unloading arm is normal. Including electrical equipment such as cables, control boxes, switches, etc., regularly check whether there are aging, short circuits and other problems to ensure the normal operation of the electrical system and avoid failures.
4. Regularly inspect and test the loading and unloading arm. During the maintenance process, regular load tests and functional tests should be carried out to ensure the safety and reliability of the loading and unloading arm. At the same time, the loading and unloading arm should be inspected regularly, and any problems found should be dealt with in a timely manner to ensure that the loading and unloading arm can be used normally.
https://www.isunbirdforeign.com/
