[1]1. Arm connection operation: Confirm that the Mobile ship loader equipment is in good condition and that the berth of the cargo ship is within the working range of the oil arm. Start the electro-hydraulic system of the hydraulic arm, unlock the arm locking device, operate the oil arm interface to connect with the cargo ship interface, lock the interface and check the sealing of the interface.
2. Disengagement operation: Drain the residual liquid in the oil arm, unlock the interface locking device and put on the interface cover, operate the oil delivery arm to retract and add the arm locking device.
3. Keep in touch with each other when operating the oil arm, and the operator should pay attention to lookout. Whether it is connecting or disconnecting the arm or loading or unloading, if there is a limit alarm, it means that the working range of the oil arm has been exceeded. The oil arm should be disconnected to adjust the berth of the ship and reconnected.
4. During the use of the hydraulic system, the hydraulic oil pressure should be within the rated range. Please refer to the oil arm manual. The hydraulic oil temperature shall not exceed 60°C.
[2]1. Check whether the operating oil tanker is moored within the rated working range of the oil transfer arm.
2. Check whether all components are in normal working condition and whether they are damaged or deformed. If there are any abnormalities, deal with them in time.
3. Check whether there is leakage and rust at the joints of all rotating joints, and whether they rotate flexibly.
4. Check whether the fastening bolts and nuts of the column base are loose.
5. Before the robotic arm is docked with the ship, the liquid in the inner and outer arm pipes must be emptied and the drain valve must be closed.
6. Connect the static ground wire .
https://www.isunbirdforeign.com/
