1. The drive belt is loose. The power of the stacker-reclaimer is driven by the transmission belt. When the transmission belt is loose, it will cause insufficient material crushing. When the transmission belt is too tight, it is easy to break, which affects the normal work. Therefore, the operator checks the tightness of the belt before each start.
2. The impact force is too large. The stacker-reclaimer is subjected to impact force during operation, which will cause the body to loosen and affect the normal crushing operation. Therefore, please check the internal parts of the fuselage for signs of loosening, and tighten them in time if necessary.
3. Blocking card machine. If the stacker reclaimer feeds too much or unevenly, and the feed does not meet the standard, it will cause blockage. This will suddenly increase the current of the device, and the automatic circuit protection device will close the protection circuit, resulting in a jam phenomenon. Therefore, the operator must strictly follow the operating standards to enter the feed when feeding, so as to avoid the problem of blockage.
4. The main shaft is broken and the machine is stuck. If the user does not operate properly or the stacker-reclaimer is overloaded for a long time, it may cause the main shaft of the stacker-reclaimer to break. Therefore, in order to avoid the phenomenon of jamming caused by the breakage of the main shaft, the operator should conduct on-site training and operation in strict accordance with the operating standards and specifications when operating the equipment. In addition, the equipment should be prevented from being overloaded, and attention should be paid to checking the operation of the equipment.
www.isunbirdforeign.com
